How To Read Aqua Rite Salt Cell Diagnostics

Diagnostic Displays
Sequential pushes of the small "diagnostic" button next to the LCD display will cause the Aqua Rite to display the following information:
1. Pool temperature (xx degrees Fahrenheit or Celsius)
2. Cell voltage (typically 22.0 to 25.0 volts when chlorine is being generated, otherwise
30-35V)
3. Cell current (typically 4.50 to 7.80 amps when chlorine is being generated, otherwise
0 amps)
4. Desired Output % ("0P" -- "100P" depending on knob position or input from remote
pool automation controller)
5. Instant salinity ( -xxxx ppm or -x.xx grams/Liter)
6. Product name sent to the pool automation control display ("AL-0" which signifies
"Aqua Rite")
7. Software revision level (r1.xx)
8. Chlorinater cell type (T-3, T-5, T-9, T-15)

On the 9th push of the button the display will revert back to the default salt display. Also, if the button is not pushed for 30 seconds, the display will revert back to the standard salt display.

Replacement parts/systems :